high quality din 41612 type b connectors How to install

commentaires · 33 Vues

high quality din 41612 type b connectors https://www.kujunconnector.com/TYPE-B-Connectors

Installation and wiring of high quality din 41612 type b connectors:

1), according to the total current of the load, installation method and application site, choose the appropriate specifications and models.

2) Unpack and remove the switch power plug and socket.

3) Open the cover, remove the four fixing screws of the chassis with a Phillips screwdriver, and remove the chassis. Remove the fixing screw from the clip, remove the long straight hair splint, and remove the end cap.

4) Pass the cable that must be connected through the hole wall of the end cover. Strip the cable sheath rubber material of the cable to the appropriate length, exposing the cable copper core of about 11mm, determine the cable connection method, tighten the power cable with a small screw, and plug in or plug in.

5), good long straight hair splint, fix the cable, cover the sleeve, tighten the four fixing screws of the sleeve, tighten the end cover.

high quality din 41612 type b connectors Production problems:

1) The use of plugs and sockets in industrial production should avoid corrosion, acetylene gas, conductive dust and other flammable substances.

2) Avoid obvious collision, vibration and extrusion.

3) The total load current shall not exceed the rated voltage of the switching power plug and socket.

4) The screws of the wiring terminal block of the power socket and the wiring terminal block connected to the cable must be tightened, otherwise the poor grounding system will cause thermal damage to the power socket.

5) It is strictly prohibited to use power-consuming plugs such as power sockets instead of power cord plugs.

6), industrial socket or RF connector offline, to prevent falling on the ground by air pollution or wet.

high quality din 41612 type b connectors https://www.kujunconnector.com/TYPE-B-Connectors

commentaires